Netstar NSW‑RPG071E‑V12 Web‑Smart, Indoor Reverse‑PoE Gigabit Switch

Here are the detailed specifications of the Netstar NSW‑RPG071P‑V12 (also referenced as NSW‑RPG071E‑V12) — a Web‑Smart, Indoor Reverse‑PoE (RPoE) Gigabit Switch:

🔌 Ports & Power

• 7 × 10/100/1000 Mbps RJ‑45 Reverse‑PoE (RPoE PD) — Ethernet-powered (24–48 V DC on pins 4/5+, 7/8–)
• 1 × 10/100/1000 Mbps RJ‑45 Uplink Port
• 12 V DC Output via Barrel Jack — powers an ONU/ONT downstream
• RPoE Input Voltage: 24–48 V DC
• Max Transmission Distance: 100 m over Cat‑5e/6

🌐 Network & Management Features

• Web-based Layer 2 Management: VLAN (802.1Q), QoS (802.1p), Link Aggregation, Traffic Control
• Plug‑and‑Play functionality
• Supported Standards: IEEE 802.3/3u/3ab, 802.3x, 802.1Q, 802.1p
• Flow Control: IEEE 802.3x for full duplex

📊 Performance & Memory

• Switching Capacity: 16 Gbps
• MAC Address Table: 2K dynamic entries
• Jumbo Frame Support: Up to 9K bytes
• Power Consumption: < 5 W (excluding DC output load)
• MTBF: ≥ 50,000 hours

🧰 Mechanical & Environmental

• Dimensions: 160 × 95 × 28 mm
• Weight: ~450 g
• Operating Temperature: –20 °C to +55 °C
• Humidity Range: 10 %–90 % RH (non‑condensing)

✅ Ideal Use Cases

• FTTH/FTTB Corridors & Multi‑Dwelling Units — ideal where AC power is not available
• Indoor CPE Zones — reduces cabling and power hassle
• Small Office Environments
• ISP ONU/RPoE Deployments — efficient power/data delivery over Ethernet

🔍 Quick Summary