Netstar NSW‑RPG071E‑V12‑OD2 (Web‑Smart Gigabit Reverse PoE Switch)
June 11, 2025
Netstar NS‑RP071F‑OD Reverse PoE Switch with Fiber Uplink
June 11, 2025
Netstar NSW‑RPG071E‑V12 Web‑Smart, Indoor Reverse‑PoE Gigabit Switch
KSh 45,000 (KSh 52,200 Incl VAT)
- 7 × 10/100/1000 Mbps Reverse PoE Ports (RPoE in)
- 1 × Gigabit Uplink Port
- 12V DC Output for ONU/ONT
- Web Smart L2 Features (VLAN, QoS, Link Aggregation)
- Powered via 24–48V DC over Ethernet
- Auto-Negotiation & Jumbo Frame Support (9K)
- 2K MAC Address Table & 16 Gbps Switching Capacity
- Indoor-Optimized Design (160×95×28 mm, fanless)
Here are the detailed specifications of the Netstar NSW‑RPG071P‑V12 (also referenced as NSW‑RPG071E‑V12) — a Web‑Smart, Indoor Reverse‑PoE (RPoE) Gigabit Switch:
🔌 Ports & Power
- 7 × 10/100/1000 Mbps RJ‑45 Reverse‑PoE (RPoE PD) — Ethernet-powered (24–48 V DC on pins 4/5+, 7/8–)
- 1 × 10/100/1000 Mbps RJ‑45 Uplink Port
- 12 V DC Output via Barrel Jack — powers an ONU/ONT downstream
- RPoE Input Voltage: 24–48 V DC
- Max Transmission Distance: 100 m over Cat‑5e/6
🌐 Network & Management Features
- Web-based Layer 2 Management: VLAN (802.1Q), QoS (802.1p), Link Aggregation, Traffic Control
- Plug‑and‑Play functionality
- Supported Standards: IEEE 802.3/3u/3ab, 802.3x, 802.1Q, 802.1p
- Flow Control: IEEE 802.3x for full duplex
📊 Performance & Memory
- Switching Capacity: 16 Gbps
- MAC Address Table: 2K dynamic entries
- Jumbo Frame Support: Up to 9K bytes
- Power Consumption: < 5 W (excluding DC output load)
- MTBF: ≥ 50,000 hours
🧰 Mechanical & Environmental
- Dimensions: 160 × 95 × 28 mm
- Weight: ~450 g
- Operating Temperature: –20 °C to +55 °C
- Humidity Range: 10 %–90 % RH (non‑condensing)
✅ Ideal Use Cases
- FTTH/FTTB Corridors & Multi‑Dwelling Units — ideal where AC power is not available
- Indoor CPE Zones — reduces cabling and power hassle
- Small Office Environments
- ISP ONU/RPoE Deployments — efficient power/data delivery over Ethernet
🔍 Quick Summary
| Attribute | Specification |
|---|---|
| Ports | 7 × Gigabit RPoE PD + 1 × Gigabit Uplink |
| PoE Input | Reverse PoE 24–48 V DC |
| PoE Output | 12 V DC barrel jack |
| Switching Capacity | 16 Gbps, 2K MAC, 9K jumbo frames |
| Management | Web‑L2: VLAN, QoS, LAG |
| Consumption | < 5 W (excl. load) |
| MTBF | ≥ 50,000 hrs |
| Temp & Humidity | –20 °C to +55 °C, 10–90 % RH |
| Form Factor | 160×95×28 mm, 450 g |
| Brand | Netstar |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Starlink Flat High Performance Kit
KSh 217,000 (KSh 251,720 Incl VAT)The Starlink Flat High Performance Kit is designed to provide enhanced satellite connectivity, especially for mobile users and environments requiring a wider field of view. Below are its key specifications:
- Type: Electronic Phased Array
- Field of View: 140°, allowing it to see 35% more sky and connect to more satellites
- Dimensions: 575 mm x 511 mm x 41 mm (22.6 in x 20.1 in x 1.6 in)
- Weight: 5.9 kg (13 lbs) without cable
- Environmental Rating: IP56 (dust and water-resistant)
- Wind Resistance: Survivable up to 174 mph
- Wi-Fi Technology: 802.11 a/b/g/n/ac/ax (Wi-Fi 6)
- Radio: Tri-Band 4×4 MU-MIMO
- Ethernet Ports: Two latching LAN ports with removable cover
- Coverage: Up to 297 m² (3,200 ft²)
- Weight: 0.57 kg (1.25 lbs)
-
HPE Aruba Networking CX 6000 24G Class4 PoE 4SFP 370W Switch
KSh 160,000 (KSh 185,600 Incl VAT)- Total Ports: 24 x Gigabit Ethernet (10/100/1000 Mbps) PoE+ ports
- PoE Power Budget: 370W (Supports IEEE 802.3at PoE+, up to 30W per port)
- Uplink Ports: 4 x SFP (1GbE) slots for fiber connectivity
- Switching Capacity: 56 Gbps
- Forwarding Rate: 41.7 Mpps (Million packets per second)
-
Starlink Mini Kit
KSh 23,000 (KSh 26,680 Incl VAT)Starlink Mini is a compact, portable kit that can easily fit in a backpack, designed to provide high-speed, low-latency internet on the go.
- Connect up to 128 devices
- WiFi 5
- Dual Band 3 x 3 MU-MIMO
-
UniFi U6 In-Wall (U6-IW)
KSh 33,333 (KSh 38,666 Incl VAT)- Wi-Fi 6 (802.11ax) access point
- Dual-band: 2.4 GHz: up to 573.5 Mbps (2×2 MIMO), 5 GHz: up to 4.8 Gbps (4×4 MU-MIMO with 160 MHz)
- 4 Gigabit LAN ports: 1x PoE In (802.3at), 1x PoE Out (802.3af), 3x data-only ports
- Wall-mount design — replaces standard Ethernet wall plates
- Managed via UniFi Network Controller
- Ideal for rooms needing Wi-Fi + Ethernet
- PoE powered (802.3at required for full features)
Reviews
There are no reviews yet.